ORDER HOTLINE 0345 130 0710
ORDER HOTLINE 0345 130 0710

EV-100 Tiller Autopilot Pack

Raymarine  EV-100 Tiller Autopilot  Pack

Availability: In stock

Save £415.05 RRP £1,695.00


Product code: 220290
Ask a question (1)

  • Details
  • Reviews
  • Product Questions
Raymarine EV-100 Tiller Autopilot Pack - An system pack designed for small tiller drive sail boats. Raymarine part no. T70153

• Intelligent EV sensor core that evolves and adapts to your vessel’s steering characteristics without any user adjustments
• No lengthy calibration procedures to perform
• 9-axis precision monitoring of pitch, roll, yaw and heading
• More freedom on Ev sensor core installation - can be installed above or below deck, upside down or off the vessels centreline
• Simple SeaTalkng connectivity to the control head and ACU.
• Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions.
• Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes.
• Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays.
• The p70 control head features vibrant color displays and is powered by Raymarine’s intuitive LightHouse user interface.
• LightHouse organises all options into simple menu structures and with Evolution’s quick setup process you will be up and running in minutes.
• Designed for sailing yachts, the p70 offers simple 1 and 10 degree direct course change push buttons.
•The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus
• Compact and unobtrusive tiller drive unit

EV-1 Sensor core
• Voltage: 12V
• Waterproofing: IPX6
• Power consumption: 30mA
• Connection: STNG & NMEA2000
• Diameter: 140mm

P70 Control head
• Voltage: 12V
• Screen size: 3.5”
• Waterproofing: IPX6
• Power consumption: 134mA
• Connection: STNG & ST1
• Size: 110w x 115Tmm

ACU-100 Control Unit
• Voltage: 12 or 24V
• Waterproofing: connector panel IPX2 & drive electronics IPX6
• Power consumption standby: 300mA
• Connection: STNG, Rudder ref, drive motor, GND
• Size: 180w x 140T x 52Dmm

Tiller Drive
• Maximum recommended laden boat displacement: 6,000kg (13,200lbs)

Pack contents
• EV-1 Sensor core
• ACU-100
• P70 control head
• Tiller Drive
• 1 x 0.4m STNG power cable
• 1 x 5m STNG backbone cable
• 1 x 0.4m STNG spur cable
• 1 x STNG 5way connector block
• 2 x STNG T piece connectors
• 2 x STNG Terminators

Only registered users can write reviews. Please, log in or register

Product Questions

Can I use the existing tiller arm from the old unit?

Yes, the tiller arm is exactly the same


Rate the answer?