Sort By:
Page 1 of 8
Glomex Wind Indicator Conversion Kit - Length: 308mmFits on Stainless Steel Whip Antenna (Product code: 230001)...
»more info
Little Hawk Wind Indicator MK 2 - A lightweight Wind Indicator for small dinghies mounted below the Gooseneck to enable the Helmsman to accurately judge the angle of the apparent wind to the boat. Per...
»more info
Hawk Wind Indicator - A lightweight, balanced vane-arm mounted above two reference arms for boats up to 26ft, enabling the helmsman to accurately judge the angle of the apparent wind. Tough nylon • Fi...
»more info
Clip for fitting to either a horizontal or vertical surface. • Length of Vane Arm 38cm/15" • Height Overall 29cm/11.5" •Weight 70 gms...
»more info
Hawk Race Wind IndicatorA larger version of the Little Hawk, using ‘V’ Jewel bearing, designed for larger single handed dinghies. Vane arm length: 27cm • Weight: 32gDSIN...
»more info
Cat Hawk - Designed for non-spinnaker Catamarans up to 8m.It mounts onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Reference ar...
»more info
Little Hawk Mk1 Wind Indicator- The Little Hawk MK1 is a small lightweight & robust Wind Indicator designed to be positioned at the top of the mast on dinghies upto 6m. Very popular with Optimists...
»more info
Feather Vane Race 1 Wind Indicator - A carbon fibre, ultra-sensitive wind indicator which will respond reliably to the lightest of airs allowing you to pick up the shifts before the competition!The 0....
»more info
Little Hawk Race Wind Indicator- The Little Hawk Race takes the ever popular Little Hawk Mk1 Wind Indicator, cuts it to minimal length & provides it with a robust & lightweight mounting system...
»more info
Inglefield Flag Clips - Used for quickly, easily & securely joining a flag or ensign to the flag halyard. Made from anodized aluminium.• Max Rope Diam: 6mm• Length: 36mm, Thickness: 4mm ...
»more info
RWO Flag Pole Mount - This flagpole socket will fit easily on to any 25mm stanchion tubing, and takes 25mm dia. ensign staffs...
»more info
Code Flag Set - 35cm- Every boat needs code flags and this well priced set means you've got them all ! The set consists of 40 international code flags made from durable nylon, and it comes in a smart...
»more info
Pine Flag Poles- A good quality pine flagstaff with nylon cleat and concealed nylon pulley in the chuck.The 2', 2'6 & 3' staffs fit a 25mm flag staff socket. The 4' & 5’ staffs have a ch...
»more info
/4 Yard (Size: 114x57cm)• Generally recommended for boats from 35-42ft / 10-13mCode: 890135 - 1 1/2 Yard (Size: 137x68cm)• Generally recommended for boats from 43-50ft / 13-15m...
»more info
Courtesy Flag • France - A quality courtesy flag for those cruises abroad.• Size: 45 x 30cm• Nylon ...
»more info
Courtesy Flag • Netherlands - A quality courtesy flag for those cruises abroad.• Size: 45 x 30cm• Nylon ...
»more info
Courtesy Flag • Belgium - A quality courtesy flag for those cruises abroad.• Size: 45 x 30cm• Nylon ...
»more info
Courtesy Flag • Germany - A quality courtesy flag for those cruises abroad.• Size: 45 x 30cm• Nylon ...
»more info
Courtesy Flag • Spain - A quality courtesy flag for those cruises abroad.• Size: 45 x 30cm• Nylon ...
»more info
Courtesy Flag • Italy - A quality courtesy flag for those cruises abroad.• Size: 45 x 30cm• Nylon ...
»more info
Page 1 of 8
Get the correct sailing courtesy flag and code flag for your sailing trip, we have a huge selection of nautical flags, jolly rogers, ensigns, Union Jack flags, British flags, sewn flags for sailing regattas. Remember a good quality sewn ensign will last for years.
Now just a flag pole, a good quality pine flag pole with a nylon cleat attached is always a good place to start. Then just add a flagstaff socket, usually made of alloy these can be mounted at the stearn of the boat.