ORDER HOTLINE 0345 130 0710
ORDER HOTLINE 0345 130 0710
Force 10

Stain Removing Gel 450ml

Boat Marine Stain Removing Gel 450ml
  • Details
  • Reviews
  • Product Questions
Force 10 Stain removing gel is an easy to use formula that removes stains from fibreglass and gelcoat without harming them.

It requires almost no elbow grease, simply apply the product, wait for 10-20 minutes, and hose off. Works well on yellowing around the waterline, and stains caused by exhausts and rust streaks. This formulation contains Oxalic Acid as its key ingredient, which works without scrubbing or polishing. The gel formula means the product will stick to vertical surfaces such as the side of your hull.

Tub size: 450ml
Coverage: 1 tub should clean the waterline of an average 40ft boat.

Application: Apply the product using a paint brush. Leave the product to work for around 10-20 minutes. Rinse the product off with water. Ideally do not allow the product to dry on the surface to be cleaned, if it does it will become harder to remove. If the temperature is below 10degC, allow the product more time to work.

Safety Advice: This product contains oxalic acid, so it is recommended that gloves, face and eye protection are used when handling this product. Wash hands thoroughly after use.

Only registered users can write reviews. Please, log in or register

Product Questions

No Questions