ORDER HOTLINE 0345 130 0710
ORDER HOTLINE 0345 130 0710

Raystar 150 10Hz GPS/Glonass antenna (STng)

Raymarine Raystar 150 10Hz GPS/Glonass antenna (STng)

Availability: In stock

Save £25.05 RRP £275.00


Product code: 210487
Ask a question

  • Details
  • Reviews
  • Product Questions

The RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.


  • 72-channel GPS receiver

  • Fast 10Hz position updates

  • Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support

  • A GNSS receiver with GLONASS compatibility

  • Low power consumption: 30mA (1 LEN)

  • SeaTalkng and NMEA2000 compatible (using a device net adapter cable)

  • Designed for low profile surface mounting or optional pole mounting


  • Nominal supply voltage 12V D.C. Powered by N2K bus

  • Operating voltage range 8 - 32V DC

  • Power consumption 30 mA max (NMEA LEN = 1)

  • Operating temperature -13ºF to 131ºF (-25ºC to +55ºC)

  • Relative humidity max 93%

  • Waterproof IPx6/7

  • Supported connection protocols SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor)

  • Sensitivity High sensitivity - acquisition down to -163dBm

  • No. of channels 72

  • Positioning System GPS & GLONASS

  • Satellite Differential Type WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India)

  • Differential acquisition Automatic

  • Position accuracy (95%) <15m

  • Position accuracy with SDGPS (95%) <5m

  • Speed accuracy (95%) <0.3kt

  • Time to first fix from cold start <2 minutes (< 45 seconds typical)

  • Time to first fix from hot start < 8 seconds -72 hour hold up battery allows for hot start

  • Geodetic Datum WGS84

  • Mounting Surface/rail/pole

In the Box

  • GPS receiver unit

  • Mounting seal

  • SeaTalkng spur cable (3 metres)

  • Documentation

  • M4 x 40mm Threaded studs x 3 (used for surface mounting)

  • Finger nuts x 3 (used for surface mounting)

Only registered users can write reviews. Please, log in or register

Product Questions

No Questions