ORDER HOTLINE 0345 130 0710
ORDER HOTLINE 0345 130 0710
Marine 16

Diesel Dipper Fuel and Tank Cleaner

Marine 16 Diesel Dipper

Availability: In stock

Save £14.05 RRP £714.00


Product code: 640132
Ask a question

  • Details
  • Manuals
  • Reviews
  • Product Questions
The “Bilge Pump” for fuel tanks…

Ever had to have your diesel tanks cleaned of sludge? The Diesel Dipper® will do it for you.

Cleaning sludge from a small fuel tank can start at £1000. Anyone with reasonable DIY skills can fit a Diesel Dipper® which will clean the FLOOR of your fuel tank BELOW the suction outlet, keeping it free from Diesel Bug, water and contaminants.

The Diesel Dipper® sucks from the very bottom of your fuel tank, meaning that years of accumulated water and sludge is sucked up via the 12v pump into the Dipper where it is simply drained off before returning the clean fuel back to the tank through a 40 micron washable stainless steel filter.
The Dipper effectively transfers the unwanted contents from the bottom of your large fuel tank into a small tank where they can be managed and removed.

The fully self-contained system can be run independently of the engine but, if used whilst the boat is under way, any water or sludge that is sloshing about on the bottom of the tank will eventually be drawn into the Diesel Dipper®, resulting in even more efficient cleaning.

The Patent Pending "Tank Separator" is the heart of the system. The fuel/water/sludge enters the top and the water/sludge is separated out of the fuel into a collection chamber where the contaminants are easily drained off periodically. Used every day, and independent of the engine running, it effectively scours the very bottom of your fuel tank leaving it clean and free of debris.

The Diesel Dipper® should be connected to the tanks drain plug. If there is no drain plug you can fit a Tank Top "Dip Tube" (available separately) – a simple fitting is attached to the top of the tank where a 10mm draw pipe is pushed through to rest on the bottom of the tank.

• Pump: 12V DC, 30W
• Includes 5A fuse protection
• Suction Lift: 2.5m
• Size: H37cm x W15cm x D18cm
• Weight: 3kg
• Includes 3/8 BSP fittings with 10mm hose tails
• Supplied with full fitting instructions

Only registered users can write reviews. Please, log in or register

Product Questions

No Questions