ORDER HOTLINE 0345 130 0710
Currency
ORDER HOTLINE 0345 130 0710
Force 4

Electric Comfort Sea Toilet 12V

Force 4 Electric Comfort Sea Toilet 12V

Availability: In stock

Save £49.55 RRP £319.50

£269.95

Product code: 830532
Ask a question (11)

  • Details
  • Reviews
  • Product Questions
Electric Comfort Sea Toilet 12V
- A smart fitted design electric toilet, with a vitreous china bowl, which is both attractive & comfortable to use.
Easy to install, the combined flushing and waste removal pump unit is integrated into the base of the bowl. It can be installed either above or below the waterline & the macerator pump allows expulsion up to 3.50m in height.
• Self priming up to 1.5m vertically
• Supplied with a one-push button control panel
• All metal parts and screws are stainless steel
• Complies with ISO 8846, EN 55014
• Hose Connections: Inlet 19mm (3/4”), Outlet 38mm/25mm (1.5”/1”)
• Voltage: 12V
• Amp Draw: 24Amp
• Dimensions: W340 x D316mm, H340mm (lid closed), H411mm (lid open)

Only registered users can write reviews. Please, log in or register

Product Questions

My toilet 2 years old is not drawing sea water to flush, is this a pump problem. It still flushes. Does the impeller need replacing. Do you have a schematic, a list of spare parts and source for spares?

Debris is usually the cause, especially as the flush is still working, however it could also be the impeller. The determine the fault, it will need be dismantled. Please see the spares list attached to this answer if required.

29/10/18

Rate the answer?
Can this be connected to the pressurized fresh water system?

The toilets are designed to draw water, using the in-built pump, for the flush function.  They are not suited to a pressurised system.

22/01/19

Rate the answer?
Can this toilet be fitted in an RV?

Yes - This 12v toilet could be used on board an RV.

29/1/19

Rate the answer?
Hi,Can this be used on a narrow boat that doesn't have a pump out system ?Thanks

Product code 830790 is better suited for freshwater systems.  Our Bristol store has a great deal of knowledge on narrowboat installations so do please contact them on 0117 926 8396.

20/3/19

Rate the answer?
what fittings do i need , i’m swapping an existing vetus toilet for this one hopefully

We don't know you current installation so it's hard to say.  You may wish to re-new the hoses and clamps? It does come with S/S screws but you may need some suitable wires to connect the 12V supply.

Hose Connections are: Inlet 19mm (3/4”), Outlet 38mm/25mm (1.5”/1”)

20/3/19.

Rate the answer?
Hi,Do you have picture from top? I'd like to see the seat shape. The dimensions suggests its wider than deep... that sounds wrong. Also height sounds wrong. Or do you have the seat dimensions? Is it a round seat? Or oval shaped.... W340 x D316mm, H340mm (lid closed), H411mm (lid open).What's the warrantee?

The dimensions are correct. There is a 1 year Warranty for every product we sell. Please see images attached to view the top of the Toilet. 

24/04/19

Rate the answer?
Hi, will these run at 24v as well as 12v?

No, you will need to step down transform the voltage to 12V.

30/4/19

Rate the answer?
I want to use this toilet in a Sprinter van conversion, but I'll only have a 100-130 litre water tank so I'm concerned about water usage... How many litres does it use per flush?

On average the toilet will use 1-2 litres of water per flush, this is dependant on the length of time the button is pushed. 

30/05/19

Rate the answer?
I can’t see how it bolts down.does it use the existing Jabsco mount points?Thanks

Please find the Instructions for this toilet attached, showing the dimensions you require.

05/07/19

Rate the answer?
Hi. Does this leave the bowl dry & can it be used with raw (river) water flush? Thanks

The Operating Instructions attached say that you are to push the button switch to operate flush until the bowl is thoroughly rinsed and the discharge pump has ejected the water from the base of the bowl. If the toilet has not been used for a while, and the bowl is dry, it’s recommended to operate the pumps for a few seconds so the bowl gets wet. This would indicate that the bowl is left dry after flushing. The instructions also say that the built in rinse pump is suitable for raw water or fresh water from separate toilet water tank.

23/08/19

Rate the answer?
Can this toilet pump into a holding tank on a narrow boat ?

It will pump into a holding tank on a narrow boat, but it has a raw water inlet feed. It if is supplied from a water tank you would need a different model of toilet, which unfortunately, we do not sell. 

12/09/19

Rate the answer?