ORDER HOTLINE 0345 130 0710
ORDER HOTLINE 0345 130 0710

Computerised Auto Bilge Pump

Rule Computerised Auto Bilge Pump 12V

Availability: In stock

Product code: M830509
Ask a question

  • Details
  • Reviews
  • Product Questions
A fully automated submersible bilge pump with computerised operation which turn on every 2.5 minutes for about 1 second to sense for water. If water is present it will run until all water is removed and revert to sensing mode. There is no need for a separate switch, although it has a third wire for optional manual override or a warning light. The compact, tough plastic body has a quick release strainer which allows rapid cleaning and the unit is ignition protected.
• Built-in Thermal cut off
• Check valve included for back flow prevention
• Vented body to prevent air locking
• Threaded port for easier installation & maintenance
• Maximum recommended discharge head: 2m
• Voltage: 12Volt
• Low amp draw

Available in two capacities:

830509 - 500 for 19mm (3/4”) hose
• Output: Up to 31 litres/min (7 gallons/min) without check valve • Size: H107mm, 64mm x 74mm • Current Draw: 1.6A

830610 - 1100 for 25mm (1”) & 28mm (1 1/8”) hose
• Output: Up to 69 litres/min (15gallons/min) without check valve • Size: H120mm, 64mm x 74mm • Current Draw: 3.7A

Only registered users can write reviews. Please, log in or register

Product Questions

No Questions