Self-Pumping Cooling Kits
- Ideal for use in warmer climates, these sea water-cooled compressor & evaporator plate kits allow you to convert a locker or coolbox into a proper fridge or freezer. Even on the hottest days the system will operate at an extremely high level of efficiency to keep the fridge cold or the freezer down to temperature.
The special through-hull fitting contains a non-restricting, full-flow spiral heat exchanger for cooling the refrigeration agent. This can be installed in place of an existing underwater waste fitting – thus alleviating the need for an extra hole in the bottom of your boat. The system is entirely self-pumping via the movement of the boat in the water - no separate pump required - and with no fans or pumps needed to remove the heat generated by the compressor, the whole system uses much less battery power & is quieter than air cooled units. Waste heat is expelled through a special fitting in the galley sink drain hose.
• Kits include: 12/24V BD35F Compressor (Size: L210xW135xH155mm), Cooling O-shaped plate with 2-3m pipe, Brass through-hull fitting with 1m pipe, Zinc anode & Thermostat switch (The plates/pipes are pre-filled & fitted with quick-fit connectors)
Available in 2 sizes:
Code: 820085 - SP2051 Kit
• Small-O Plate (Size: 240x85x210mm) • Max Fridge Volume: 125Ltr
Code: 820084 - SP2351 Kit
• Medium-O Plate (Size: 320x100x230mm) • Max Fridge Volume: 150Ltr