ORDER HOTLINE 0345 130 0710
ORDER HOTLINE 0345 130 0710
Force 4

Echo Transducer Antifouling

Force 4 Echo Transducer Antifouling
  • Details
  • Reviews
A unique, water based antifouling formulated specifically for the coating of fishfinder and echosounder transducers.
It is solvent free so it won’t damage the transducer thus meeting the guidelines of the major transducer manufacturers.
• Doesn’t reduce the transducer signal
• Easy to apply by brush & quick drying
• No primer required
• Outstanding adhesion on any surface
• Colour: Black
• Size: 70ml
• Thinners: Water

ECO user guide:

- Mix very well before application
- Do not use with temperature below 5° C or above 38° C

Surface Preparation:
- Sand with fine sandpaper (n.220min.) or with abrasive pads (like Scotch Brite)

- Apply one coat of Echo
- Wait at least 1 hour (at 20° C)
- Apply a second coat of Echo
- Wait at least 6 hours at 20° C before launching

Harmful by inhalation. Irritating to eyes. May cause sensitisation by skin contact. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep out of reach of children. Do not breathe vapour. Avoid contact with skin. Do not empty into drains. Wear suitable gloves. If swallowed, seek medical advice immediately and show this container or label. Use only in well-ventilated areas. Avoid release to the environment.

You're reviewing: Echo Transducer Antifouling

  •   1
    1 star
    2 stars
    3 stars
    4 stars
    5 stars

* Required Fields