Sort By:
Page 1 of 9
YS 112mm Solid Base Cleat - A solid base alloy cleat suitable for mast or deck mounting available in various lengths from 3" to 7"....
»more info
115mm S/S Fairleads (Pair) - A pair of stainless steel handed fairleads with two hole fixing.Length: 115mm...
»more info
YS 150mm Alloy Deck Cleat - All Y.S. fittings are manufactured from high magnesium content aluminium alloy providing hard wear and corrosion resistance....
»more info
Harken 15deg Angled Cam Riser A 15degree angled riser suitable for the Harken Cam-Matic (150) & Carbo-Cam (365) cam cleats.Specification:• Height: 25mm• Length: 65mm• Width: 32mm• Fastener Spacing: 38...
»more info
Harken 15deg Angled Micro Cam Riser A 15degree angled riser suitable for the Harken Micro Cam-Matic (468) & Micro Carbo-Cam (471) cam cleats.Specification:• Height: 19mm• Length: 48mm• Width: 24mm• Fa...
»more info
165mm Sliding Cleat - 25mm T-Track - A cost-effective solution to fitting a mid-ship spring cleat. Simply remove a genoa track end stop, slide on the cleat and lock it in the desired position. Fits 25...
»more info
YS 178mm Solid Base Cleat - A solid base alloy cleat suitable for mast or deck mounting available in various lengths from 3" to 7"....
»more info
YS 200mm Alloy Deck Cleat - All Y.S. fittings are manufactured from high magnesium content aluminium alloy providing hard wear and corrosion resistance....
»more info
205mm Sliding Cleat - 32mm T-Track - A cost-effective solution to fitting a mid-ship spring cleat. Simply remove a genoa track end stop, slide on the cleat and lock it in the desired position. Fits 32...
»more info
YS 24" Aluminium Stanchion - Made from high magnesium content aluminium YS alloy giving hard wear and corrosion resistance.• Base diameter: 25mm• Maximum wire diameter: 8mm• Height to Top Wire: 625m...
»more info
YS 260mm Alloy Deck Cleat - All Y.S. fittings are manufactured from high magnesium content aluminium alloy providing hard wear and corrosion resistance....
»more info
YS 300mm Alloy Deck Cleat - All Y.S. fittings are manufactured from high magnesium content aluminium alloy providing hard wear and corrosion resistance....
»more info
300mm/12" S/S Handrail - Stainless steel fittings are stronger and have outstanding corrosion resistance. So if you need to fit out or replace your rails, then these are quality made from top grade 3...
»more info
4" Stainless Steel Cleat • 100mm - Good quality 316 stainless steel cleats with four hole fixings....
»more info
500mm/19.5" S/S Handrail - Stainless steel fittings are stronger and have outstanding corrosion resistance. So if you need to fit out or replace your rails, then these are quality made from top...
»more info
6" Stainless Steel Cleat • 150mm - Good quality 316 stainless steel cleats with four hole fixings....
»more info
650mm/25.5" S/S Handrail - Stainless steel fittings are stronger and have outstanding corrosion resistance. So if you need to fit out or replace your rails, then these are quality made from top...
»more info
8" Stainless Steel Cleat • 200mm - Good quality 316 stainless steel cleats with four hole fixings....
»more info
8" Stainless Steel Rubbing StrakeManufactured from highly polished 304 stainless steel, this smart rubbing strake will help prevent damage from mooring lines or sheets. Pre-drilled with tapered ends•...
»more info
YS 83mm Solid Base Cleat - A solid base alloy cleat suitable for mast or deck mounting.Length: 83mm...
»more info
Page 1 of 9
Its important to ensure all of your deck fittings are in good condition and make the job easier, if they don't it may well be time to change them. View our selection of sailing cleats, boat fittings & deck hardware - we've got stainless steel bullseyes & padeyes, non slip tape, YS alloy solid base cleats, stanchion bases and chain pipes