Boat Plumbing Fittings & Accessories

PTFE Tape - Use for any threaded pipe connections & general plumbing on board. Supplied in snap together storage case for protection. Size: 12mm x 12m... »more info

In-Line Coarse Water Strainer - An in-line strainer with coarse stainless steel filter. Removeable clear cap to ease cleaning.Available in 2 sizes:Code: 640034 - 1/2" hose connectionsCode: 640097... »more info

Whale 1/2" Non Return Valve - It is advisable to fit non-return valves to ensure pumps remain primed, especially with electric pumps... »more info

Diameter 11-16mm for 1/2" hose - Quality marine hose clips fitted with hexagonal head & screwdriver slot.... »more info

Diameter 14-22mm for 3/4" hose - Quality marine hose clips fitted with hexagonal head & screwdriver slot. Sold as singles.... »more info

Diameter 20-30mm for 1" hose - Quality marine hose clips fitted with hexagonal head & screwdriver slot.... »more info

Diameter 25-35mm for 1.25" hose - Quality Stainless steel hose clips.... »more info

1/2" Blue Cold Water Hose, per meter. - High quality food grade hose which resists algae formation available for both hot and cold water.... »more info

1/2" Red Hot Water Hose, per meter - High quality food grade hose which resists algae formation available for both hot and cold water.... »more info

Pump Guard For Bilge Pumps •3/4" Hose, Course Stainless Steel Filter - This pump guard filter offers inlet protection and stops debris from getting into the pump. Easily fitted in line, it has a tran... »more info

20m Flat Hose - A necessity to have on board and often forgotten. This compact, sturdy reel holds 20m of flat hose, which does not kink or twist, and has a universal tap connector and spray nozzle on... »more info

1" Y Valve - A simple, inexpensive plastic 3 way diverter valve for bilge systems. Uses 1" hose.... »more info

Pump Guard For Fresh Water pumps •1/2" Hose, Fine Stainless Steel Filter - This pump guard filter offers inlet protection and stops debris from getting into the pump. Easily fitted in line, it has a t... »more info

Non Return Valve for 1" & 1.5" hose - A simple non return valve that helps keep pumps primed and stops water flowing back into the bilges. For both 1" and 1.5" hose.... »more info

1.5" Y Valve - A simple, inexpensive plastic 3 way diverter valve for bilge systems. Uses 1.5 hose."... »more info

1" Whale Diverter Valve - This robust, reliable diverter valve allows one pump to draw from 2 locations or can divert flow to a holding tank or overboard. Suitable for use in bilge and toilet systems,... »more info

Diameter 35-45mm for 1 1/2" hose - Quality marine hose clips fitted with hexagonal head & screwdriver slot. Sold as singles.... »more info

1/2" Reinforced Clear water Hose - A reinforced hose that does not kink going around corners - Often used with bilge pumps.... »more info

3/4" Reinforced Clear water Hose - A reinforced hose that does not kink going around corners - Often used with bilge pumps.... »more info

1/2" BSP for 10mm or 13mm ID Hose Plastic Skin Fitting - High quality, moulded, white nylon skin fittings avoids corrosion or electrolytic decay. Not recommended for use below the waterline. Fits 2 ho... »more info